SNV Netherlands Development Organization would like to float a tender for interested eligible & competitive bidder for the supply of SUMBERSABLE PUMP and Generator

SNV-Logo-Reportertenders

Overview

  • Category : Generators
  • Posted Date : 05/23/2022
  • Phone Number : 0116166232
  • Source : Reporter
  • Closing Date : 06/04/2022

Description

ADVERTISEMENT

INVITATION FOR BIDS FOR PROCUREMENT OF SUBMERSIBLE PUMPS AND GENERATOR

SNV-ETHIOPIA WASHTRA PROJECT

SNV Netherlands Development Organization http://www.snv.org/ is a Dutch based International Development Organization that provides market-based solutions for the poor through local institutions and organizations in 28 developing countries in Asia, Africa, and Latin America.

Working in Agriculture, Energy, and Water, Sanitation & Hygiene, we have built a long-term, local presence in Asia, Africa, and Latin America. Our global team of local and international advisors works with local partners to equip communities, businesses and organizations with the tools, knowledge, and connections they need to increase their incomes and gain access to basic services – empowering them to break the cycle of poverty and guide their own development.

SNV Netherlands Development Organization would like to float a tender for interested eligible & competitive bidder for the supply of SUMBERSABLE PUMP and Generator to support the implementation the Project as per detailed specification on the bid document.

 Specification:

Submersible Pump and Generator Specification

S/N

 

 Description Required Specification for submersible pump and/or Generator Unit Quantity
1  

 

Submersible pump

·         Supply of 3-phase rewindable type and water-cooled submersible pump (Motor and Impeller) which gives 3lt/s at a head of 232m with all appropriate accessories; pump casing impeller, shaft etc are all stainless steel and outlet diameter 21/2

·         One control panel with running hour and Impedance starting system (Autotransformer) with all standard board

Accessories:

·         Power cable 3x10mm2 = 150m (flexible type and cooper wire), Electrode cable 2×1.5mm2=150m (Flexible and Copper wire type), 3 Pcs electrode sensors (WLS Electrode), 21/2” one pair pump clump, GT-2 Vulcanization kit of 1 set, cable lag 16mm  9 pcs and other related accessories

Note: The pump must be suitable for 6” casing that means the diameter of motor and impeller is not exceed 143mm and the minimum head of this pump is not greater than 160m.

Three phase- Frequency 50/60HZ, A.C; Rated Voltage 380V-415V)

 

set

 

 

 

1

2  Submersible pump ·         Supply of 3-phase rewindable type and water-cooled submersible pump (Motor and Impeller) which gives 5lt/s at a head of 433m with all appropriate accessories; pump casing impeller, shaft etc are all stainless steel and outlet diameter 21/2

·         One control panel with running hour and Impedance starting system (Autotransformer) with all standard board

Accessories:

·         Power cable 3x50mm2 = 275m (flexible type and cooper wire), Electrode cable 2×2.5mm2=275m (Flexible and Copper wire type), 3 Pcs electrode sensors (WLS Electrode), 2 pcs pump clump of 21/2” dia, GT-3 Vulcanization kit of 1 set, cable lag 70mm * 9 pcs and other related accessories

Note: The pump must be suitable for 6” casing that means the diameter of motor and impeller is not exceed 143mm and the minimum head of this pump is not greater than 320m. Three phase- Frequency 50/60HZ, A.C; Rated Voltage 380V-415V)

set 1
3 Submersible pump     Supply of 3-phase rewindable type and water-cooled submersible pump (Motor and Impeller) which gives 5lt/s at a head of 360m with all appropriate accessories; pump casing impeller, shaft etc are all stainless steel and outlet diameter 21/2

·         Accessories:

·         Power cable 3x35mm2 = 250m (flexible type and cooper wire), Electrode cable 2×1.5mm2=250m (Flexible and Copper wire type), 3 Pcs electrode sensors (WLS Electrode), 2 pcs pump clump of 21/2” dia, GT-2 Vulcanization kit of 1 set, cable lag 35mm * 9 pcs and other related accessories

Note: The pump must be suitable for 6” casing that means the diameter of motor and impeller is not exceed 143mm and the minimum head of this pump is not greater than 260m. Three phase- Frequency 50/60HZ, A.C; Rated Voltage 380V-415V)

 

set

 

1

4   

Submersible pump

·         Supply of 3-phase rewindable type and water-cooled submersible pump (Motor and Impeller) which gives 5lt/s at a head of 200m with all appropriate accessories; pump casing impeller, shaft etc are all stainless steel and outlet diameter 2”

Accessories:

·         Power cable 3x16mm2 = 120m (flexible type and cooper wire), Electrode cable 2×1.5mm2=120m (Flexible and Copper wire type), 3 Pcs electrode sensors (WLS Electrode), 2 pcs pump clump of 21/2” dia, GT-2 Vulcanization kit of 1 set, cable lag 35mm * 9 pcs and other related accessories

Note: The pump must be suitable for 5 5/8” casing that means the diameter of motor and impeller is not exceed 138mm.

Three phase- Frequency 50/60HZ, A.C; Rated Voltage 380V-415V)

 

 

 

set

 

 

1

5  

Submersible pump

·         Supply of 3-phase rewindable type and water-cooled submersible pump (Motor and Impeller) which gives 5lt/s at a head of 200m with all appropriate accessories; pump casing impeller, shaft etc are all stainless steel and outlet diameter 2”

Accessories:

·         Power cable 3x35mm2 = 250m (flexible type and cooper wire), Electrode cable 2×1.5mm2=250m (Flexible and Copper wire type), 3 Pcs electrode sensors (WLS Electrode), 2 pcs pump clump of 21/2” dia, GT-2 Vulcanization kit of 1 set, cable lag 35mm * 9 pcs and other related accessories

Note: The pump must be suitable for 5 5/8” casing that means the diameter of motor and impeller is not exceed 138mm.

Three phase- Frequency 50/60HZ, A.C; Rated Voltage 380V-415V)

 

 

set

 

 

1

6 Generator Generator power of 50KVA (Prime), three phase- 380-415V AC 50HZ Pcs 1

Deadline: bids must be delivered to the address below on or before 4th, June 2022 up to 5:00 PM.

  1. Late bids will not be received.
  2. Interested bidder shall collect the full bid document from SNV Ethiopia Head office as of May 23rd, 2022, up to June 3rd /2022 from the below SNV Ethiopia Address.
  3. Both technical and financial offers should be in separate envelopes and dully signed and stamped.
  4. Technical specification should be complete.
  5. All bid prices should be valid for 90 days.
  6. Bidders are required to furnish the following copies of relevant documents:
  • Registration documents,
  • VAT registration certificates
  • Valid trading license
  • Testimonials Letter

Suppliers who have the materials at stock are preferred.

Foreign suppliers should consider the costs related to customs clearance, bonded warehouse rent, transportation, insurance, and delivery at SNV’s premises. Custom clearance will be the responsibility of the supplier and we need to receive all cleared documents with the tool kit, complete accessories.

 Office Address: Address: Logistics Department; SNV Netherlands Development Organization head office; Bole sub city, Worda 2, House number B92/6 Africa Avenue, Opp. Millennium Hall; Behind to Sky light Hotel; P. O. Box:  40675, Tel  + 251 (0) 11 616 6232, Ext 238; Fax number: +251-116166252; Addis Ababa, Ethiopia

SNV-Ethiopia reserves the right to cancel the bid partially or fully.